Repeater Diagnostic And Control (RDAC)
RD98X supports Remote (via IP port to connect to internet) and Local diagnostic (via USB) PC applications to monitor, diagnose and control the repeater status, thus increasing the maintenance efficiency. Hytera’s developed RDAC is able to support multiple master network connection to allow radio administrator to monitor multiple radio network upcoming!
Dual Slot digital audio streaming
RD98X supports streaming of both the voice slots via the rear port accessory pins, allowing third party for capability expansion.
Analog Digital Autoswitch
RD98X supports Analog and Digital channel auto switching, allowing efficient frequency sharing between Analog and Digital users during the digital migration.
IP Multi-site Connect
RD98X supports network interconnect via the IP port of repeater to form a private radio network, allowing wide area coverage to meet dispersed locations data and voice communications.
50W high power
RD98X supports maximum repeating power of 50W, and thus increasing the system coverage with lesser setup equipments.
RD98X supports maximum of 16 channels, allowing efficient radio network control at different scenarios. The channel change can be performed either via RDAC PC tools, via the repeater’s front panels channel knob and via the channel steering from the repeater’s rear port.
Analog/Digital Operating mode
RD98X supports operating mode of Analog and Digital.
Analog/Digital back to back interconnect
RD98X supports different operating mode of Analog and Digital to interconnect for voice cross patch, allowing Analog users to communicate to the Digital users and vice versa. This has allowed the smooth migration for Analog users to the digital world!
Analog Repeater Knockdown
RD98X supports repeater knockdown, that when activated via the repeater’s rear accessory pin, will disabled the transmit path of the repeater.
RD98X supports decoding up to maximum of 16 CDCSS/CTCSS in Analog channels, allowing repeating of different Analog voice users from various groups.
RD98X supports Analog voice and signaling scan, allowing repeating of different Analog voice users from various groups.
Repeater Access Management
RD98X supports radio users access control to the repeater, allows better security to prevent un-authorized users from accessing the radio network.
Analog/Digital Telephone Interconnect (via DTMF signaling)
RD98X supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a Group or Private call to radio users. This feature utilizes the Commercial Off The Shelf (COTS) Analog Phone Patch boxes and a Plain Old Telephone Service (POTS) line to connect the Repeater to the Corporate Office Phone System (PBX) or Public Switched Telephone Network (PSTN).
Continuous Wave Identification (CWID)
RD98X supports Analog transmission of the repeater identification in Morse code format.