The Hytera RD622’s compact design, integrates RF, Power supply, and duplexer into one box, which makes RD62X smaller, lighter, and easier for wall mount installation and indoor coverage.
An indoor DMR and Analogue dual mode repeater in a compact design, embedded with a power supply and optional mini duplexer. Its innovative design enables it to easily support wall-mount installation with AC/DC power. Multiple sites can connect via IP along with the RD982 to support flexible wide area and large building coverage. Integration with Hytera SmartDispatch or other 3rd party GPS dispatching software can be achieved by the RJ45 port in the side of the repeater.
Multiple Sites via IP
RD62X supports network connection via the IP port of repeater to form a private radio network to meet data and voice communication needs for wide-area coverage and dispersed locations.
Digital Audio Streaming of Dual Time Slots
RD62X supports the streaming of both the voice slots via the rear port accessory pins, allowing for capability expansion via future development.
Analog/Digital Operating Mode
RD62X supports operating mode in both Analog and Digital.
The RD62X supports Analog voice and signaling scan, allowing coverage of different analog voice users from various groups.
Repeater Diagnostic And Control (RDAC)
RD62X supports Remote IP connection to monitor, diagnose and control the repeater, thus increasing maintenance efficiency. The Hytera developed RDAC is able to support multiple master network connections to allow the radio administrator to monitor multiple radio networks.
AC/DC Auto Switch
RD62X integrates an internal power supply that supports a battery floating charge. The power supports 13.6V±15% DC and 90V-264V AC. If the AC power is cut off, the DC power (battery) automatically takes over without interruption.
Analog/Digital Back-to-Back Interconnect
RD62X supports different operating modes of Analog and Digital to interconnect for voice cross patch, allowing Analog users to communicate to Digital users and vice versa. This allows for a smooth migration for Analog users to the digital world!
Multi CTCSS/CDCSS Decode
RD62X supports decoding up to a maximum of 16 CDCSS/CTCSS codes in Analog channels, allowing coverage for different Analog voice users from various groups.
Analog/Digital Telephone Interconnect
RD62X supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a Group or Private call to radio users. This feature utilizes the Commercial off the Shelf (COTS) Analog Phone Patch boxes and a Plain Old Telephone Service (POTS) line to connect the Repeater to the Corporate Office Phone System (PBX) or Public Switched Telephone Network (PSTN).
Analog/Digital Auto Switch
RD62X supports Analog and Digital channel auto switching, allowing for efficient frequency sharing between Analog and Digital users and an easy digital migration.
All-In-One Compact Design
RD62X’s compact design, integrates RF, Power supply, and duplexer into one box, which makes RD62X smaller, lighter, and easier for wall-mount installation and indoor coverage.
Repeater Access Management
RD62X supports a repeater access control feature allowing better security to prevent unauthorized users from accessing the radio network.
Designed specifically to provide reliable radio coverage in buildings and large sites the Hytera RD622i operates in digital or analog mode to improve your communication range.
- Frequency Range
- VHF: 136-174MHz UHF1: 400-470MHz
- Channel Capacity
- Digital Protocol
- ETSI-TS102 361-1,2 & 3
- Supply Voltage
- AC 90 to 264v DC +13.6v ± 15%
- Battery Backup
- Integral Battery Charging
- Dimensions (W×H×D)
- 13″ X 8.25″ X 4″, 330 X 209.55 X 102 (mm)
- 11.02 lbs, 5.0Kg with duplexer
- Programmable Buttons
- TX Aerial Connector
- N-type socket
- RX Aerial Connector
- N-type socket
- Internal Duplexer
- YES using optional mounting kit
- Dust & Water Intrusion
- IP54 Standard
- 19″ Rack Mounting
- Back Pack
- Multiple CTCSS/ CDCSS
- Repeater Knockdown
- YES (Analog & Digital)
- IP Ports
- Audio Output for Slot A & B
- Remote Programming
- YES via IP interface
- Remote Diagnostic & Control
- Software available
- Emergency Mode
- Lone Worker
- Priority Scan
- Digital Encryption
- Advanced encryption (Hytera or DMRA 128-bit and 256-bit AES) available via chargeable license file.
- Multiple Key Encryption Decode
- Multilanguage Menu
- Power on & off user logo programming
- Voice Interrupt
- Yes (latest firmware required and Smart Dispatch V4.5.6 or above)
- Text Messaging
- Yes via application software
- Quick Text Messages
- Up to 25 pre-programmed via CPS (for telemetry use)
- MPT1327 / 1343 Trunking
- Tier 3 Trunking
- Single Site XPT
- Multi-Site XPT
- Number of Sites
- Over-the-Air Programming
- Analog Only Version
- Not Available