RD96X is Hytera’s first Digital/Analogue portable repeater that is compatible with the DMR standard. Compact and embedded with a mini duplexer, the device is fairly wieldy. It supports a range of power supply plans to guarantee uninterrupted communications during emergencies; its API and 100 Mbps network port combine to support an extended array of applications; the device provides IP67 protection, making it reliable in any hostile operating environment.
Smart Battery; A 10Ah smart Li-Ion battery can support at least eight hours of work when working at %50 duty cycle and high TX power. Compatible with the smbus 1.1 standard.
IP67; Compatible with the IP67, the device can operate properly under immersion test (1meter for up to 30minutes).
The feature enables two way radios with digital and analogue users to intercommunicate in different operating modes to guarantee users’ seamless transition from analogue to digital capabilities.
- Voice Input/output via Dual Time Slots: For Monitoring and Voice Recording
- Supports Operating both in Analogue and Digital Mode
- Digital-Analogue Interconnection for Smooth Transition
- Digital/Analogue Compatibility and Smart Switching
- Repeater Diagnostics and Control
- Smart Battery (optional)
- Reliable and Durable
- Upgradable Software
- Flexible Applications
- Flexible Networking
- User-friendly Panel
- Slim and Portable
- Built-in Duplexer
- External Battery
- Emergency Port
- IP67 Protection
- 16 Channels
Smart Battery (optional)
A 10Ah smart Li-Ion battery can support at least eight hours of work when working at 50% duty cycle and high TX power. Compatible with the smbus1.1 standard, RD96X can monitor battery conditions such as estimated remaining capacity, used capacity percentage, and usage record; the device can also maximize the battery life; through smart charge management, it can automatically recharge the battery for use anytime; powered by three levels of battery protection, the device considerably enhances charging safety and reliably.
Repeater Diagnostics and Control
Through a PC-based application, the product can monitor, diagnose and control remote (connected to the Internet via an IP port) and local repeaters (via a USB port), thus increasing the productivity. Hytera’s RDAC software supports network access at multiple points and allows the administrator to monitor networked two-way radios.
Voice Input/output via Dual Time Slots: easy for monitoring and voice recording
In digital mode, the device supports voice input and output via dual time slots and enables users to record calls continuously.
Digital/analog Compatibility and Smart Switching
Back to back interconnection of digital & analog network can be achieved by wired or wireless IP, ensuring a smooth analog -to-digital transition.
By connecting geographically distributed repeaters that run at the same or different frequencies to form an IP-based and location-independent wireless communication network, IP-based repeater interconnection allows mobile radios to obtain voice and data services while roaming.
The product supports up to 16 channels. You can switch between channels using PCbased RDAC software, the channel selector knob on the front panel, or the external interface on the repeater.
Digital-analog Interconnection for Smooth Transition
The feature enables two-way radios with digital and analog capabilities, and digital and analog users to intercommunicate in different operating modes to guarantee users’ seamless transition from analog to digital capabilities.
The GPS module supports GPS data transmission and enables emergency command centers to monitor the location of a small mobile network in real time.
The Hytera RD962i is the first digital/analog repeater that is suitable for outdoor use. Compact and lightweight, the RD962i can deployed quickly and carried in a backpack (optional), mounted on a wall, or installed in an equipment rack.
- Frequency Range
- VHF: 136-174MHz UHF1: 400-470MHz UHF3: 350-400MHz
- Channel Capacity
- Digital Protocol
- ETSI-TS102 361-1,2 & 3
- Supply Voltage
- DC +13.6v ± 15%
- Battery Backup
- 10Ah Li-Ion 8h at 5-5-90 duty cycle at 10W TX)
- Integral Battery Charging
- Dimensions (W×H×D)
- 11.85″ X 7.24″ X 2″, 301 x 184 x 51(mm)
- 6.6 lbs, < 3Kg
- Programmable Buttons
- TX Aerial Connector
- PL259 socket
- RX Aerial Connector
- SMA socket
- Internal Duplexer
- YES using optional mounting kit
- Dust & Water Intrusion
- IP67 Standard
- 19″ Rack Mounting
- Wall Mounting
- Multiple CTCSS/ CDCSS
- Repeater Knockdown
- YES (Analog & Digital)
- IP Ports
- Audio Output for Slot A & B
- Remote Programming
- YES via IP interface
- Remote Diagnostic & Control
- Software available
- Emergency Mode
- Lone Worker
- Priority Scan
- Digital Encryption
- Advanced encryption (Hytera or DMRA 128-bit and 256-bit AES) available via chargeable license file.
- Multiple Key Encryption Decode
- Multi-language Menu
- Power on & off user logo programming
- Voice Interrupt
- Yes (latest firmware required and Smart Dispatch V4.5.6 or later)
- Text Messaging
- Yes via application software
- Quick Text Messages
- Up to 25 pre-programmed via CPS (for telemetry use)
- MPT1327 / 1343 Trunking
- Tier 3 Trunking
- Single Site XPT
- Multi-Site XPT
- Number of Sites
- Over-the-Air Programming
- Analog Only Version
- Not Available